Skip to Content

EEPL 1W 2.4GHz Wifi Amplifier

The EEPL 2.4GHz Wi-Fi Amplifier is a compact, high-performance bidirectional RF power amplifier integrated with a low-noise receiving amplifier (PA + LNA). Engineered specifically for 2.4 GHz ISM-band applications—including Wi-Fi networks, long-range drone video links, and telemetry systems—it boosts transmission output power while simultaneously enhancing incoming signal sensitivity.


Key Performance Metrics 

1 W

Rated TX Output Power

2400–2500

MHz Operating Band

34 dB

TX Small-Signal Gain

General

Model Name

EEPL 1W 2.4GHz Wi-Fi Amplifier

Product Type

2.4 GHz ISM-band Bidirectional RF Power Amplifier (PA+LNA)

Integrated TX PA and RX LNA front-end

Application

Wi-Fi / Video / Telemetry

2.4 GHz wireless range-extension applications

RF Performance

Operating Frequency Range

2400–2500 MHz

2.4 GHz ISM band

Rated Output Power (TX)

1 W (+30 dBm)

Rated conducted RF output power

TX Small-Signal Gain

≈34 dB

Based on PA gain

LNA Gain (RX Path)

10–15 dB

Based on LNA

Input Power Range

+14 to 16dbm optimal

+17dbm maximum  


Bandwidth

100 MHz

Covers approximately 2400–2500 MHz

Noise Figure (RX)

≈1.5 dB

Input / Output VSWR

2:1

1 dB Compression Point

34 dBm (approximately 2.51 W)

Harmonic / Spurious Suppression

−45 dBc Typical

Supported Wireless Standards

IEEE 802.11b/g/n

Generic 2.4 GHz ISM

EIRP Achieved

35.15 / 38.0 / 43.0 dBm

With 2.15 / 5 / 10 dBi reference antennas respectively

TX/RX Switching

PA/LNA Bidirectional Module

Yes

Integrated PA, LNA and RF switching

TX/RX Switching Method

RF Switch + Detector/Comparator

RF switches controlled using RF detection/control circuitry

Switching Time

≈500 µs

Approximate

Insertion Loss — RX Path

≈0.8–1.2 dB

Bypass path

Insertion Loss — TX Path

≈0.5–1 dB

Bypass path

Power Supply

Input Voltage

3.3 V & 5 V

Separate supply rails for RF/control sections as implemented

TX Current

≈1 A

Approximate current at rated RF output

RX / Standby Current

≈100–200 mA

Power Consumption

≈4 W

DC-RF Efficiency

≈25%

Power Connector

2-Pin Male Header

Use female jumpers or 2-pin connectors

Physical

Dimensions

30 × 70 × 6 mm

PCB/module dimensions

Weight

20 g

Without antenna

RF Connector

SMA

RF input (male) / output (female)

Environmental

Operating Temperature

−20 to +70 °C

Regulatory

Frequency License

Confirm per Region

2.4 GHz ISM band is typically license-exempt, subject to applicable regional requirements.