Skip to Content

RF Power Amplifier 

A 2.4 GHz RF front-end module integrating transmit amplification, a low-noise receive path, RF switching and monitoring for digital video communication.

Request Quote     Discuss Integration

Core Capailities  

High-Linearity Digital-Modulation Support

Enables reliable transmission of digitally modulated RF signals with high linearity and minimal signal distortion.


Directional Coupling & RF Power Monitoring

Provides directional RF signal coupling for accurate monitoring of forward and reflected power levels during operation.


Integrated Low-Noise Receiving Path

Incorporates a low-noise receive path to maintain high sensitivity and reliable signal reception in demanding RF environments.


RF Output Power and EIRP

Converting dBm to Watts

RF output power may be expressed in dBm or watts. These units describe power, but they use different scales.

Conversion formula:

Power (W) = 10 ^ ((Power (dBm) - 30) / 10)

For a power level of 34 dBm:

34 dBm ≈ 2.51 W

This is the mathematical conversion of 34 dBm to watts. It does not, by itself, confirm the amplifier's rated output power.


What Is EIRP?

Effective Isotropic Radiated Power (EIRP) estimates the RF power radiated in the direction of an antenna's maximum gain, relative to an ideal isotropic antenna. It accounts for conducted transmitter power, antenna gain, and applicable transmission losses.

EIRP calculation:

EIRP (dBm) = Transmitter Output Power (dBm) + Antenna Gain (dBi) - System Losses (dB)

For example, if an RF system delivers 34 dBm of conducted power, uses an antenna with 6 dBi gain, and has 1 dB of total transmission loss:

EIRP = 34 + 6 - 1 = 39 dBm

39 dBm ≈ 7.94 W EIRP

This is an illustrative calculation, not a confirmed specification for this product. Actual EIRP depends on the measured conducted output power, antenna gain, and applicable losses in the final configuration.


Technical Overview 

25-30 km+ LOS; depends on antenna and environment

                                    Estimated range


30-32 dB

 PA gain


35-36 dBm

      P1dB compression point


-98 to -100 dBm

RX LNA sensitivity


Compact RF front end with RF switching and monitoring

Architecture