Skip to Content

Sarathi V1.2 

Sarathi flight controller

Sarathi V1.2 is a 4-layer UAV flight controller built on the STM32H743 (Cortex-M7, 480 MHz, 2 MB flash, 1 MB RAM). It carries a TDK ICM-40609-D IMU, Bosch BMP390 barometer and ST IIS2MDC magnetometer, drives ten PWM outputs (eight DShot-capable ESC channels plus two auxiliary), and brings GPS, telemetry, RC, CAN, I²C and spare UART/ADC ports out on JST GH connectors. It is designed to work with EEPL ESCs and the EEPL power module.


Available to buy online on BotBhidu.com.   Buy on BotBhidu   Download User Manual (PDF)

Key Performance Metrics 

480 MHz

Cortex-M7 Processor


10 PWM

PWM Outputs


15g

Module Mass


Core Capabilities 

​

PX4 and ArduPilot compatibility

The on-board IMU, barometer and magnetometer all have upstream PX4 and ArduPilot drivers.

​

CAN bus for DroneCAN

FDCAN port with TJA1051 transceiver and on-board 120 Ω termination for DroneCAN ESCs and peripherals.

​

microSD flight logging

4-bit SDMMC microSD slot for flight logs, parameters and mission data.

Technical Overview 

Processor

STM32H743ZIT6, Cortex-M7, 480 MHz, 2 MB flash


IMU 

TDK ICM-40609-D, 6-axis, SPI


Barometer

Bosch BMP390, I²C


Magnetometer

ST IIS2MDC, I²C

​UART Ports 

5 (GPS, telemetry with RTS/CTS, RC, 2 spare)


External I²C

1 bus on JST GH and pad-out


Analog Inputs

Battery voltage and current, plus 3 spare


GPIO

3 GPIO (2 shared with auxiliary PWM), plus safety switch and buzzer


​ USB Interface

USB-C 2.0 with ESD protection


GNSS

​

External GPS port (UART)


Supply

5 V (4.5–5.5 V) from USB-C or power module, automatic switch-over


Firmware Update

​

USB


CAN

1 × FDCAN, TJA1051 transceiver, 120 Ω termination


PWM Outputs

10: ESC 1–8 (DShot-capable) plus 2 auxiliary on the bottom connector


Operating Temperature

−40 °C to +85 °C


Ground Control Software 

QGroundControl / Mission Planner


Dimensions

58.7 × 49.4 mm, 4 × M3 on 48 × 39.1 mm


Origin

Designed and manufactured in India