Skip to Content

EEPL 4W Telemetry 

Engineered specifically for demanding Unmanned Aerial Systems (UAS), the EEPL 4W Telemetry System provides high-power, low-latency data links over extreme distances. Delivering up to 4 Watts of output power in the 865-867 MHz band, this industrial-grade telemetry link ensures seamless real-time flight control, telemetry streaming, and mission-critical communication between your aircraft and Ground Control Station (GCS).

 

Available to buy online on BotBhidu.com.   Buy on BotBhidu

Key Performance Metrics 

4 W

Rated RF Output Power

865–867

MHz Operating Band

5–25 km

LOS Range*

General

Model Name

EEPL 4W Telemetry

Product Type

4W Telemetry Radio

UAV telemetry / GCS communication

ISM / Non-ISM Band

ISM

865–867 MHz operating band

RF Specifications

Operating Frequency Range

865–867 MHz

865–867 MHz operating band

Rated RF Output Power

4 W

Maximum RF output power

Channel Bandwidth

≈200 kHz

As specified for the telemetry configuration

Number of Channels / Hop Set

10

10-channel frequency-hopping configuration

Frequency Hopping

YES — FHSS

Frequency-hopping communication

Modulation Scheme

GFSK

Supports OOK, (G)FSK and 4(G)FSK

Receiver Sensitivity

≈ −117 dBm

Specified sensitivity

Antenna Connector

SMA

Compatible with Omni or Yagi antenna

ISM Band Exemption

Yes, subject to WPC conditions

Regulatory conditions/WPC documentation apply

Data / Link Performance

 Data Rate

2 kbps to 250 kbps

Specified module data-rate range

Serial Baud Rate

57600 bps

UART telemetry configuration

Link Latency

33 ms

Line-of-Sight Range

Approx. 15 km

with Omni directional antennas

High Directional Range

Approx. 25 km

High-gain directional antennas

Interference Avoidance

YES — FHSS + AFA/LBT

Frequency-hopping capability specified

Duplex Mode

Half Duplex

Tx and Rx share the RF path

Interface

Physical Interface

UART

UART interface with USB GCS connectivity

Protocol Supported

MAVLink / Transparent Serial

UAV telemetry and GCS communication

Configuration Software

SiK AT-command / Mission Planner

Power

Input Voltage

5 V Nominal

Transmit Current

≈1–1.2 A Nominal

≈2 A @ Psat

Receive Current

≈30 mA

Power Consumption

≈5–6 W Nominal

≈10 W @ Psat

Power Connector

JST-GH 6-Pin

Physical

Dimensions

55 × 35 × 8 mm

L × W × H

Weight

20 g

Without antennas

Environmental

Operating Temperature

−10 to +50 °C

Packaging & Support

What's Included in the Box

2 × EEPL 4W Telemetry Radio

4 × Antennas